On October 6 at ~14:00 UTC, our data centre outside of Boston, MA went down. This affected most of our network services- even ones not hosted in the data centre. The problem was that both of our primary and backup network connections went down at the same time. We’re not sure why yet. We are consulting with our network provider. It took us 2 hours to get our systems back online.
We are pleased to share the 2021 board election slate. Crossref’s Nominating Committee received over 60 submissions from members worldwide to fill five open board seats. It was a fantastic group of applicants and showed the strength of our membership community.
There are five seats open for election (three small, two large), and the Nominating Committee presents the following slate.
The 2021 slate Candidate organizations, in alphabetical order, for the Small category (three seats available):
Crossref Similarity Check news: iThenticate v2.0 ready for launch
Last year, we announced the upcoming launch of a new version of iThenticate, the product from Turnitin that powers Crossref Similarity Check. We know some of you have been waiting a long time for this upgrade and we are very happy to share with you that we are now ready to release it.
We will be rolling out this new version in stages, so not everyone will be able to upgrade to the new version immediately.
TL;DR We missed an error that led to resource resolution URLs of some 500,000+ records to be incorrectly updated. We have reverted the incorrect resolution URLs affected by this problem. And, we’re putting in place checks and changes in our processes to ensure this does not happen again.
How we got here Our technical support team was contacted in late June by Wiley about updating resolution URLs for their content. It’s a common request of our technical support team, one meant to make the URL update process more efficient, but this was a particularly large request.
The web deposit form is suitable for making small numbers of deposits, and you do not need any knowledge of XML to use it. You can use this form to deposit metadata for journals, books, conference proceedings, reports, and dissertations. You can also upload NLM or JATS-formatted XML using this form.
How to use the web deposit form to register your content
Step one: Select your content type
Start at the web deposit form and select the type of content you want to register: journal, book, conference proceedings, report or dissertation. Different fields will appear depending on what you’ve chosen.
Step two: Add the content you want to register
You can deposit a journal-level DOI only or DOIs for each article within a given issue.
Register DOIs for articles - you can register articles for up to one issue in any deposit. On the first screen, enter information for the relevant journal or issue, then click add articles. After you’ve added information for each article, click on Add another article to register the next article. When you are done, click Finish.
Register a journal-level DOI only - on the first screen, enter the information for the relevant journal or issue and click Submit journal/issue DOI.
Please note: when you register your first item, be really careful about the journal title you enter - this will create a journal title record and any future submissions will have to match this. Your journal title doesn’t have to match the title in the ISSN portal, but if you do want it to match, make sure to check what this is before you register your first item.
You can register both book- and chapter-level information. Add you content and select Submit Book DOI to deposit a title-level DOI, or select Add Chapters to enter metadata for chapters attached to the book being registered. For series and sets, only one volume can be registered at a time.
Enter event and conference paper information. Select Add Papers to enter metadata for conference papers.
Select Submit Report DOI to deposit a single report DOI, or select Add Content Item if the report contains multiple chapters or papers.
Complete the fields and click Submit dissertation.
Step three: Login and submit your content
Login with your Crossref account credentials, and then add the email address that should receive the submission log email. Even if your login username is your email address, you still need to add an email address to receive the submission log email. It can be the same or different from the email you used as your login username. Finally, click Deposit.
Your submission is then added to our submission queue. When we’ve processed your file we’ll send you a log via email (to the address you gave us in step three). You must review this log to make sure your content was registered successfully. Learn more about error and warning messages.
We also send you a copy of the XML that has been generated by the web deposit form. This XML is just for your records - you don’t need to do anything with it. If changes or corrections need to be made to your metadata record, you can edit and submit the XML instead of re-entering your metadata into the form. If you do edit the XML, be sure to increment the value in the <timestamp> field to ensure a successful update.
Web deposit form limitations and how to work around them
There are some metadata elements that you can’t currently register as part of your initial deposit in the web deposit form. However, you can add many of these to an existing deposit later on, using our other tools. Here’s a list of the elements that can’t currently be included in your initial deposit with the web deposit form, and your options for adding them later:
archive locations, and article numbers or IDs can’t be registered using the web deposit form.
Funding and license information, Similarity Check URLs, and text and data mining URLs can be added to existing DOIs in bulk using a supplemental metadata upload.
How to use the web deposit form to upload a JATS or NLM file
You can use the web deposit form to upload an XML file built according to the NLM or JATS document type definition (DTD) publishing tag set. Find out more.
How to use the web deposit form for supplemental metadata upload using a .csv file
Supplemental metadata upload enables members to add metadata elements to existing DOIs in bulk by uploading a .csv file via the web deposit form. You can use it to add funding metadata, license metadata, funding and license metadata together, or Similarity Check URLs.
Click the choose file button next to csv file information and select your .csv file for upload
Enter the email address that should receive the submission log email
Click upload csv data
Some initial validation relating to formatting is performed upon upload. Incomplete or incorrect files will return an error message, and will not be deposited. If the file passes the initial validation, it will be converted to XML, and registered with us. Additional validation is performed upon deposit.
You will receive a submission log when your deposit is complete. Please review the log to be sure your DOIs have been updated successfully.
Please contact us with questions or comments about your .csv upload. If you are reporting problems with a .csv upload, please attach the .csv file to your support request.
Specifications for all .csv files
Files submitted for supplemental metadata upload using a .csv file must comply with these specifications:
Don’t use commas (,) or quotation marks (") within a column value
Dates must be in the format: YYYY-MM-DD
If metadata is not available for an item, leave the cell blank. If an entire column is not populated, you may omit it. Do not enter placeholders such as n/a or -, as this will cause your deposit to fail, or cause incorrect metadata to be attached to a DOI
Files may be up to 45 MB in size. We automatically split the file into batches of 5,000 DOIs for processing. We send you two emails for each batch: a submission log, and a copy of the submitted XML, so uploading a large file may result in many emails.
<funder_identifier>: funding agency identifier in the form of a DOI
<award_number>: grant number or other fund identifier
If a DOI has multiple funders, the DOI must be repeated for each funder. We recommend that all available metadata is deposited. If a piece of funding metadata is not available (for example, a grant number) the field should be left blank.
Open your file using spreadsheet software (such as MS Excel). Your file should contain two columns with the headings DOI and <item crawler="iParadigms">, where DOI is the DOI being updated and <item crawler="iParadigms"> is the URL being submitted for Similarity Check indexing. Here is an example:
Replace the example DOIs (10.5555/test1) and URLs (https://www.yoururl.com/pdf1) with your DOIs and URLs.
Be sure to save the file as .csv and not as .xlsx (or any other file type)
Some spreadsheet programs add additional quotation marks to the column headers, such as "DOI" or "<item crawler="iParadigms">". If your upload is not successful, please open your file in a text editor, and make sure the top line of the file is simply: DOI or <item crawler="iParadigms">. Edit if necessary, and resubmit.